PICTURE
AUDIO
CHANNEL
FUNCTION
SETTING
ME NU
EXIT
SELECT
ADJUST
OFF
ALWAYS
DURATION
HALFTONE
OSD POSITION
SCREEN SAVER
LANGUAGE
ENGLISH
OFF
MID
Basic operation (to be continued)
Turning the TV On and Off
1.
Press POWER button to turn power on.
2.
If TV is in standby mode, please press POW ER
button on the remote control to turn it on . The
indicator will switch from red to blue.
3.
If you want to stop watching TV or go out for a
while, you can press POWER button on the re-
mote control. If you want to watch TV again, you
can press this button again.
4.
Unplug the power cord when the TV will not be
used for a long period time.
Auto power-off
If the TV is under no signal sleep on, it will enter
standby mode automatically . If the TV is non-
signal at VGA mode, it would turn to standby in
15 seconds. If the TV is non-signal at other
sources, it would turn to standby in 5 minutes.
Memorizing the Channels
Yo ur T V c an memo rize all o f the availab le
ch annels. After the available channels are
memorized, use PROG
/
button to browse
channels.
Language select
Before using TV, you can set the language:
1)
Press MENU button on the remote control, then
press
/
Arrow button to select “Setting” menu
as following:
Note:When you use OSD to adjust the TV, you should
notice: The function which displays in gray is
not available in current mode. If you press
/
button to select an item, this function will be
skipped automatically.
NICAM
TV
YPbPr
PC
HDMI
ZOOM
SOUND
INPUT
INFO
RECALL
SLEEP
MENU
EXIT
OK
U V
W X
T S
