11
E361
E309 PRO
until it reaches the 4-pin connector recess. Connect the
wires according to the pin assignment below.
4. Replace the plastic panel over the 4-pin connectors.
The pin assignment is as follows:
1) XLR pin 1 shield cable to position marked no. 1 on pcb
2) XLR pin 2 red cable to position no. 2 on pcb
3) XLR pin 3 white cable to position no. 3 on pcb
4) The no. 4 is disconnected.
E309D PRO
White wire
Red wire
Shield
Microphone cable
can be led out from
bottom or back
GOOSENECK
MICROPHONE
BASE
Microphone cable
can be led out from
bottom or back
White wire
Red wire
Shield
