Supplied accessories
Extremely light weight diaphragm, very sensitive to sound. Very small
versions available for hiding applications. High performance condenser
microphones are regarded as standard equipment of recording studios for
extreme detail capturing. Operates with power, such as phantom or battery.
－
5
－
Knowing your microphone
Superlux provides variety selection of microphones for professionals and
amatures. To know your microphone is the first step to successful result.
Type of transducer
Condenser
Condenser microphones work with power. Professional standard is 48VDC
phantom power. Some microphones work with lower voltage as low as
1.5VDC, such as battery power model. E101 work with 9 to 48VDC phantom
only and 1.5VDC battery. Please make sure your sound system provide
adaquate power to the microphone.
Powering microphone
About Frequency Response
Suitable for working at controlled environment, or for acoustic
measurements. Although people persuit flatness, but for none-
professionals, it is a challenge to makes it works as expectation.
Flat
Based on years of practical experience of pro users. There are curves to be
build for various applications, so that it is very simple to use the
microphone for the purpose. Limiting bandwidth, and emphasing are typical
skill.
Popular curve response
Incorporating switchable filters to elliminates interference, such as sub-
sonic filter to cut air-conditioner and floor vibrations. And allows full flat
when used in controlled environment.
Variable response
－
6
－
Maintainence
Condenser microphone shall be kept in low humidity environment for best
sound performance. Store the condenser microphones in airconditioned room
or dehumidifier to keep away form moisture. Clean air is another important
factor. Keep away from smoking environment to avoid tar residuals.
Mounting the microphone
Pressure gradient microphone is very sensitive to vibration. Suitable shock
mount for high performance microphone is necessary for extreme low noise
recording. Sturdy stand can set the microphone excatly at the sweet spot and
keep it there. Choose heavy duty microphone stand for studio condenser
microphone which weights much more than handle microphone.
Superlux provides wide range of microphone stands for various demands. Big
Foot Willie is specially developed for large condenser microphones that able
to support 2 large microphones with stereo bracket for single point stereo
recording.
Extension foot on all the 'E' versions serve to mount heavy studio microphone
in limit space live sound applications.
Distance to source
Close miking or distant miking sound very differently. Vocal recording or live
performance practice close miking mostly. Suitable proximity effect is one
desired target, and lower feedback problem is another factor for live sound
application.
While distant miking is common practice for recording, especially stereo pair
recording with large group of performers, such as orchestra or choir.
Distant miking generally picks up less bass section with pressure gradient
type of microphone (cardioid, figure-8, shotgun...) due to acoustic nature and
lack of proximity effects.
Rich bass with distant miking can be recorded with pressure type of
microphone (Omni), which performs the same frequency response with close
or distant pick-up.
Picks up most signal on axis. Rejects side and picks up least to the back.
Suitable for live sound re-inforcement. Apparent proximity effect and most
singer likes to take this bass boost advantages which is not good for speech.
Cardioid
Directivity
Select or set the directivity of your microphone for stereo recording, for
various music instrument, vocal, speech, and environmental sound pick-up.
Pair of spaced omni for A/B stereo, pair of near coincident cardioid for ORTF,
and pair of coincident XY for Blumlein stereo.
Universal mounting clip
Spring clip
Flat surface mounting plate
Tie clip„
Guitar clip …
S06 wind screen †
E101TQG Wiring Diagram
Red
White
Shield
Void
E101DXLR Wiring Diagram
Red
White
Shield
－
4
－
