I
►
NAME AND FUNCTION OF EACH COMPONENT
� M A N U A L
�MANUAL
MODE
I
MODE
On
PART
PART
•
WIDTH
3
WIDTH
SPEED
Off
SPEED
ROLLER
ROLLER
ZERO
ZERO
Press arrow keys to select
Press arrow keys to select
3D MASSAGEJ
Press MENU button. Choose 3D. Adjust the 3D MODE (Deep shiatsu, healthy
breath, Massage extend), massage FORCE and PART.
Deep shiatsu: Deep shiatsu massage on the back for 10
minutes.
Healthy breath: Works to support, slow rhythmic
breathing for
5
minutes.
Massage extend: Enables user to extend massage for an
additional
5
minutes.
FORCE:
User can manually adjust 3D massage force
from level 1 to 5.
Part:
Under PART function, press the right button first,
then press the up or down button to choose Whole,
Partial or Point massage.
-----------------191-----------------
I
►
PREPARATION BEFORE USING
Installation method
Step 1: Take out the components of massage chair
► Open the main carton, and take out the quilting product packages, accessory
carton and the main body of the massage chair carefully.
► Check whether the components are complete. (Please check one by one according
Step 2: Install left and right armrests
► Connect the air tube port under the armrest to its corresponding output air tube.
(It
is the same way for the other side.)
Air insert tube
► Open the zipper of armrest and PU cover, then take cover panel out.
► Install the armrest with arm shelf, pis assure that the fixing hole aim at the inner
roller and blocks of seat shelf, push the armrest forward, then fix with screws,
outer roller and sliding blocks. (It is the same way as the othe side), ( Note: the
sliding blocks rubber side should be outward when fixing the sliding block)
Cover panel
Screw
Z i p p e r - - - -
I n n e r b l o c k - - - -
- - - - - - - - - - - - - - - 1 a 1 - - - - - - - - - - - - - - - -
