14
GB
15
OVERVIEW / HANDLING YOUR UNIT /
MAINTENANCE AND CARE
OVERVIEW
1. Filter
2. Cover
3. Cover-Lock-Button
4. On/off switch
5. Handle
6. Base Station
7. Casing
8. Water level Indicator
9. Operation light
HANDLING YOUR UNIT
Important notice:
Prior to using this device for the first time, we
recommend cleaning it by boiling and discarding
water once as per the following instructions. This
will remove any dust or residue remaining from
manufacture.
• Place the base station on a stable, level and
heat-resistant surface. Please be sure that the
device cannot slide or tip over.
• Open the cover by pushing the cover-lock-button
and pulling the cover handle up at the same
time.
• Fill the tank with clear water. The water level
must be between both water level marks (min./
max.) of your unit. The device can overheat if
the water level is too low. Boiling water can
splash out if the water level is too high.
• Close the cover; the device will automatically
switch off when the water boils only if the cover
is closed.
• Place the device on the base station and
connect the power plug to a power outlet.
• Please be sure that the opening to pour fluids
does not face toward a person as hot steam
escapes from this opening during boiling.
• Operate the on/off switch by pushing it
upwards. The operation light comes on, to show
that the device has ben switched on. The water
will now be boiled.
• Please be sure that the cover is tightly closed
during boiling. Danger of Burns!
• After the water has boiled, the device
automatically switches off. The switch moves
back to the “OFF“ position and the operation
lamp goes out.
• After the water has boiled, wait a moment until
it stops bubbling. Never open the lid while
boiling or pouring.
• The heating process will be shut off immediately
if the device is lifted from the base station. The
device will switch off.
• The water boiler is equipped with overheating
protection. This will interupt the heating process
of the device if it is switched on without any
water in the tank. In this case, the device must
cool off for at least 15 minutes prior to filling
the tank with water and re-starting the heating
process.
• Pull the power plug out of the power outlet if
this device is not in use.
6
2
1
7
9
4
5
8
3
30467-English_2 .indd 14
29/1/07 10:56:04 AM
