20
5
First Time Operation and Calibration
5.1 Menu Setup
This section describes how to configure the various settings (set points, alarms, and
calibrations) using the WG-602 control panel.
CAUTION:
The WG-602 FCL controller should not be opened except for initial installation and
troubleshooting and should only be opened by a trained and approved technician.
The WG-602 FCL menu is a simple and intuitive interface with a large display. The
control panel includes the following components:
1. LCD display: measurements displayed on the top; alarms displayed on the
bottom.
2. Menu bottom
– Enters and scrolls through the menus.
3. Esc bottom
– Moves one level back in the menu without making changes.
4. OK
– Enters setting change modem and accepts setting change
5. Up/Down arrows
– Changes values up or down
Figure 10: WG602 FCL control panel and display
WG-602 FCL includes operator menu and technician menu. Each menu has a
separate password.
