2
Set the Leveling Plate and Column Mount in position. Mark the hole locations,
and drill holes into the concrete.
Recommend:
Use 1/2" x 5" 300-series SS or hot-dipped Galvanized bolts.
Fasten Standard Column Mount
Using a level, ensure the Column Mount
is plumb using the adjustment screws.
Level Column Mount
3
Column Placement
10" Tapered & 8" Straight* Column
Subtract 15" from rafter length
8" Tapered & 6" Straight* Column
Subtract 13" from rafter length
Rafter
Beam
10" Tapered & 8" Straight* Column
Subtract 15 3/4" from beam length
8" Tapered & 6" Straight* Column
Subtract 13 3/4" from beam length
1
Using the measurements below, mark an outline
for the column mounts. If there are more than
four columns, be sure to space them evenly.
*
Straight includes both square and round columns
Use the 3'- 4'- 5' rule, as
shown, to ensure square.
3'
4'
5'
Post Mounts
SuperiorPlasticProducts.com
