background image

4

GENERAL INFORMATION

 

 

CAUTION

 This equipment is designed and sold for commercial use only by personnel trained and 

experienced in its operation and is not sold for consumer use in and around the home nor 
for use directly by the general public in food service locations.

 Before using your new equipment read and understand all the instructions & labels 

associated with the unit prior to putting it into operation.  Make sure all people associated 
with its use understand the units operation & safety before they use the unit.

 All shipping containers should be checked for freight damage both visible and concealed.  

This unit has been tested and carefully packaged to insure delivery of your unit in perfect 
condition.  If equipment is received in damaged condition, either apparent or concealed, a 
claim must be made with the delivering carrier.

 Concealed damage or loss - if damage or loss is not apparent until after equipment is 

unpacked, a request for inspection of concealed damage must be made with carrier within 
5 days.  Be certain to retain all contents plus external and internal packaging materials for 
inspection.  The carrier will make an inspection and will supply necessary claim forms.

These models are equipped for the voltage and wattage indicated on the nameplate.  These 
units are designed to operate on alternating current (A.C.), two wire single phase service only 
and are equipped with an approved lead in cord set with a three prong grounding type plug.  

DO NOT CONNECT TO DIRECT CURRENT (D.C.).

UNPACKING

Carefully remove the steamer from the shipping and packing & protective material.  Remove 
all removable parts and clean with hot water and mild detergent.  Wipe the unit using damp 
cloth.  Never hose down the unit with water, this steamer has 

Unit should also contain:

 

• Operations manual & Authorized Service Agent Listing Packet

Purchasers Responsibility

• To see that the electric services for the unit are installed on site in accordance with the 

manufacturer's specifications and municipal codes.

Summary of Contents for FS1RS-120V

















Reviews: