4
•
Use this device exclusively for toasting toast bread, slices of bread and
toast waffles. Do not put any oversized bread slices, bread slices with
spreads, other foods, metal or plastic foils, or other objects into the
toast slots.
•
Empty and clean the crumb tray regularly! Bread crumbs could ignite!
•
This device must never be operated without contents or without the
crumb tray.
OVERVIEW OF DEVICE
1. Toast slot
2. Toast slide
3.
Defrost button with indicator light
4. Browning control with browning scale 1 – 6
5.
Stop button with indicator light
6. Bun warmer
7. Crumb tray
NOT SHOWN: Power cord with power plug
Cord winder at base
HANDLING TOASTER
IMPORTANT NOTE:
Before operating toaster, make sure that the device, power cord and power plug
are in perfect condition and that all packing materials have been removed. Also
ensure that no foreign objects have reached the inside of the device!
Before first using this device, we recommend that the toaster be operated
according to the following handling instructions without bread slices one time in
order to heat up toaster to remove any possible existing production residues on the
heating wires. A build-up of smoke or odour is possible in this case. This is not a
defect and will disappear! Never toast more than 2 slices of bread (1 slice per toast
slot)!
•
Unwind the power cord completely from the cord holder under the base of the
device and put the device on a stable, even and heat-resistant standing surface.
Make sure that the device cannot slip or tip.
•
Connect the power plug to the mains.
•
Adjust the
browning control (4) to the desired level (1 = lowest level / 6 =
highest level). You can read the browning level on the browning scale.
•
Make sure that the
toast slide (2) is at the top and put the bread slices in the
toast slot (1), so that they cannot get stuck when sliding down.
•
Press the
toast slide (2) down carefully, until it locks in and the toast cycle
begins. The indicator light beside the
stop button (5) lights up.
10002137_KT-3091_IM_V02a_P130104_2013_05_24_GB.indd 4
24/05/2013 5:04 PM
