SuperiorFireplaces.us.com
900806-00G
13
Complete your gas installation by connecting incoming gas line with flexible gas line. Secure tightly with wrench but DO NOT OVERTIGHTEN.
EMBER AND PAN MATERIAL PLACEMENT
1. Open bag(s) of vermiculite and fill until it is even across burner pan
(see
Figure 19
)
.
2. Smooth pan material just even with edges of burner pan.
3. Remove ember material from bag and flatten small amounts into quarter size pieces and lay on top of surface of pan material
(see
Figure 20
).
4. Place just enough ember material to cover burner pan material. Leave a 1/2" space between pieces.
Figure 18 - Connecting Flexible Gas Line to Millivolt Valve
P
IL
O
T
ON
OFF
IN
OUT
Gas Shutoff Valve
Flexible Gas Line Do
NOT Kink
1/2" NPT Incoming
Gas Line
NOTE:
1) Wire Connections Not
Shown for Clarity
2) * 1/8" NPT Plugged
Tapping
Red Surface Indicates For
Propane/LP Use Only
Pilot Adj.
Inlet Pressure Tap
Outlet Pressure Tap
Figure 19 - Place Vermiculite on Burner Pan per Instructions
Figure 20 - Ember Material on Surface of Pan Material
(Vermiculite)
Vermiculite (Pan
Material)
Burner Pan
Grate
Ember
Material
Burner
Pan
Vermiculite
(Pan Material)
Grate
INSTALLATION
Continued
Figure 21 - Completed Installation of Vermiculite and Embers
