Page 7 of 7
CDA300 Processor Settings
* BW Disclaimer
Different DSP processor manufactures are not consistent
in their implementation of digital parametric EQs. The
SLS recommended filters will not be replicated by all
DSP
devices. If the DSP device that is used continuously
varies the Q value of the filter depending on the +/- dB
level, the DSP will not match our settings. (Most of these
devices do not allow filter Q to be shown at all.)
High Pass Filter
Equalization
Frequency
Slope
w/o subwoofer - HPF
60Hz
24dB Oct. Butterworth
w/SP15 subwoofer - HPF
80Hz
24dB Oct. Butterworth
Frequency
BW*
Q
Level
1,375Hz .125
11.54
+4dB
2,000Hz .25
5.76
-3dB
Limiting
RMS
Voltage
49
Volts,
16 msec attack, 256 msec release, 100:1 ratio (recommended predictive peak stop @ 98 Volts or amp clipping)
See Application Note
“Setting System Limiters”
