CLEARANCE TO COMBUSTIBLES
The following clearances meet the minimum requirements for a safe
installation:
Side wall:
17” (324 mm) measured from the fireplace side.
Ceiling:
6’ 8” (2,032 mm) measured from the base of the fireplace.
Fireplace enclosure:
Bottom
: 0”
Side:
0” to standoff
Back:
0” to standoff
Top:
Do not fill the space above the fireplace with any material
(Except the wood framing. See
Page 10, Figure 9).
Chimney:
2” (50 mm)
Mantel:
45” (1143 mm) measured from the base of the fireplace.
WCT4820WS Replacement Parts
Description
Cat./Part No.
Baffle refractory (2 pieces)
PR-ISO2205
Back refractory
PR-SR2203
Right side refractory
PR-SR2204D
Left side refractory
PR-SR2204G
Bottom refractory
PR-SR2201
Front refractory, right side - ash lip
PR-SR2202D
Front refractory, left side - ash lip
PR-SR2202G
Door handle
PR-SR1787
Ceramic glass panel Contemporary
PR-SR2222
Ceramic glass panel Victorian
PR-SR2230
Secondary air tube
PR-SR2271
Cast-iron log supports (2)
PR-SR2245
Touch-up paint, aerosol, black metallic SBMB6309
H8159
Louvers, upper and lower (1)
PR-SR2218-1
Snap disc, blower
VTU
Bracket, secondary air tube
PR-SR2214
Hinge assembly, fireplace and door
PR-SR2395UL
Door handle rod and mechanism
PR-SR2118
Door handle and brass cap
PR-SR2325
Door handle brass cap
POIGNE002
Gasket, door, 73” (5/8” dia.)
PR-SR1823G
Gasket, glass, 69” (5/16” dia.)
PR-SR1685D
Blower 250 CFM for central forced air kit, BISZY
BISZY
Blower variable speed control with decorative wall plate
for (BISZY), VRUW
VRUW
Thermo-disk, on/off blower control (for BISZY), VTU
VTU
Blower to flexible pipe adaptor, BISAVF
BISAVF
Backdraft damper, BISBD
BISBD
Fireplace to Flex adaptor and 2 clamps, BISAF
BISAF
WCT4820WS Metal Fab Collar and Sleeve
F4188
REPLACEMENT PARTS LIST
SPECIFICATIONS
Cat. No.
Model
F1793
WCT4820WS
Product Reference Information
Weight
385 lbs
Height
36”
Width
36”
Depth
24-1/2”
Firebox W x H x D - measured in front
22” x 11-3/4” x 12”
Chimney weight ASHT (6” dia)
6.25 lb per linear foot
Chimney weight AC (6” dia)
3.25 lb per linear foot
Chimney weight S2100+ (6” dia.)
10.8 lb per linear foot
Contact an IHP dealer to obtain any of these parts. Never use substitute
materials not approved by IHP. Use of non-approved parts can result
in poor performance and safety hazards.
Model
Emission Rate
Heat Output
EPA Estimated
Efficiency
WCT4820WS
3.7 g/hr
10,442-27,746 btu/hr
63%
24
