Printed in U.S.A. © 2016 Innovative Hearth Products
P/N 900667-02 REV. NC 05/2016
Page 2 of 2
Specifi cations and clearances are subject to change without notice.
Refer to Installation Manual before installation of these appliances for
updated dimensions and instructions.
Clear
anc
es
VRE4032 SERIES
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Supplied
Firebox Hood
Must Be Used
at All Times
Wire-mesh
Screen
Firebox
Noncombustible
Material May
Project Off this
Surface above
the Firebox Hood
Mantel Shelf
Note: Any portion of the
mantel shelf must NOT
extend beyond this profile.
1-1/2 (38)
6-3/4 (172)
12 (305)
Note: All vertical
measurements are
from top of fireplace
hood opening to
bottom of mantel shelf.
These minimum
clearances replace any
other recommended
clearances supplied
with your ANSI Z21.11.2
approved gas logs.
Wall board or facing
material (above
firebox) may be of
combustible material,
including decorative
mantel ornaments or
other similar projec-
tions off of the facing
material.
Framing
Material
20
(508)
16
(407)
12
(305)
Inch (millimeter)
Minimum Wall and Ceiling Clearances (see fi gure below)
A. Clearances from the side of the fi replace cabinet to any combustible
material and wall should follow diagram shown here.
Example: The face of a mantel, bookshelf, etc. is made of combustible
material and protrudes 3-1/2” from the wall. This combustible mate-
rial must be 4” from the side of the fi replace cabinet.
B. Clearances from the top of the fi rebox opening to the ceiling should
not be less than 42”.
C. When the fi rebox is installed directly on carpeting, vinyl tile or other
combustible material, other than wood fl ooring, the fi rebox should be
installed on a metal or wood panel extending the full width and depth
of the enclosure.
D. Clearances from the bottom of fi rebox to the fl oor is 0”.
12-1/4 (312)
10-1/2 (267)
8-3/4 (223)
7 (178)
5-1/4 (134)
3-1/2 (89)
1-3/4 (45)
7/8 (23)
1/2 (13)
1/2
(13)
1
(26)
2
(51)
4
(102)
6
(153)
8
(204)
10
(254)
12
(305)
14
(356)
16
(407)
Example
Inch (millimeter)
Pr
oduc
t Inf
ormation
Listing Inf
ormation
PFS
®
US
C
Report No. F09-130
Cat. No.
Model
Refractory
Weight
Cu. Ft.
F0485
VRE4032RS
Red Stacked
138 lb
14
F0491
VRE4032WS
White Stacked
138 lb
14
F0486
VRE4032RH
Red Herringbone
138 lb
14
F0492
VRE4032WH
White Herringbone
138 lb
14
These appliances comply with National
Safety Standards and are listed by PFS Cor-
poration to ANSI Z21.91 Ventless Firebox
Enclosures for Gas-Fired Unvented Decora-
tive Room Heaters and is approved for use
with appliances listed to ANSI Z21.11.2
decorative type unvented room heaters.
Nailing F
langes
Nailing
Flanges
Nails or Wood
Screws
Indoor Firebox
Nailing
Flanges
Nails or
Wood
Screws
Indoor/Outdoor Firebox
