SuperiorFireplaces.us.com
126595-01_H
16
FIREBRICK WALL INSTALLATION
WARNING
LIFTING HAZARD
SINGLE -PERSON LIFT COULD
CAUSE INJURY.
USE ASSISTANCE WHEN MOVING
OR LIFTING.
Figure 31 - Removing Shipping Brackets
Figure 32 - Slots for Firebrick Walls
Figure 33 - Installing Side Walls
Retaining
Bracket
Leading
Brick
Right Wall
Slot
Right Face
Hearth
FIREBRICK WALL INSTALLATION
IMPORTANT: Installation of brick should be done
after the fireplace is placed in a permanent location.
1. The fireplace is shipped with the hearth preinstalled. It is held in
place for shipping with 3 shipping brackets (Figure 31). Remove
these brackets before installing any of the other firebrick walls.
2. Install the left and right firebrick walls. There is a bracket with
2 tabs on the bottom of each firebrick wall. Angle the wall into
the fireplace opening and into the slots on the side of the hearth
(Figure 32), then tilt the top of the panel toward the firebox sur-
round.
3. Secure the firebrick wall using 2 of the retainers provided. The
bracket will slip underneath the metal lip on the top of the wall
and screw into the inner dome of the fireplace (Figure 33).
4. Install the rear firebrick wall last. Place the wall face side down
on the hearth with the bottom of the wall toward the rear of the
firebox and the top toward the front of the fireplace. Tilt the wall
up toward the back of the firebox. Secure with 2 rear retaining
brackets provided (Figure 34).
Figure 34 - Installing Rear Wall
Retaining Bracket
5. It is recommended that the joints between all firebrick walls be
grouted for a more finished look, see grouting instructions.
For more information and to watch a how to video go to
SuperiorFireplaces.us.com and select Technical Support.
Shipping
Brackets
