Operation
900966-00B, 04/2019
Innovative Hearth Products
DRT3000-C Series Direct-Vent Gas Fireplaces
58
3. Place rear log (1) on the tab (b) on the right and rotate log until it contacts the left tab (a).(Figures 40 and 42).
4. Place left twig log (2) (Figure 43) on pin located in Rear log (1) (Figure 42).
Installing the DRT3000-C 35 Series Log Set (continued)
Figure 42 - Place rear log (1)
Figure 43 - Place left twig log (2)
Bottom View
Fits over Tab “b”
(Figure 40)
Rests against Tab
“a” (Figure 40)
1
Pin for Log (2)
6. Right twig log (3) will straddle the second from the right grate tine and rest on Rear log (1) in landing (Figure 44).
5. Middle twig log (4) will straddle the second from the left grate tine and rest on Rear log (1) and contact the left twig log (2) (Figure 45).
Figure 45 - Place middle twig log (4)
Figure 44 - Place right twig log (3)
Tab “a”
1
Fits over pin on Log
(1) (Figure 42)
2
1
Bottom View
3
1
2
Log (4) staddles
this grate
4
1
2
Log (3) staddles
this grate
3
Landing for Log (3)
(Figure 44)
