NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
1
CONTEMPORARY FACE KITS
INSTALLATION INSTRUCTIONS FOR INSTALLING CONTEMPORARY FACE KITS
FOR USE WITH DRI3030TEN, DRI2530TEN AND DRI3030TENC GAS FIREPLACE INSERTS
900145-01
REV. NC, 12/2013
HEARTH PRODUCTS
KITS AND ACCESSORIES
KIT CONTENTS (See Figure 1)
1 ea. Face
1 ea. Instruction Sheet
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO
THESE INSTRUCTIONS.
TURN OFF THE APPLIANCE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.
INSTALLATION INSTRUCTIONS
Installation of the surround assembly is required prior to installing the
Contemporary Face Kit. Install the surround assembly per instructions in
the installation and operation manual provided with the fireplace insert.
Step 1. Using the 5/32” allen wrench, remove the two screws on the side
of the upper air deflector and loosen the two screws on the top.
See Figure 2.
Figure 1
Contemporary Face Kits
Cat. No.
Model
Description
F1845
DRI3030TEN-CONTF-BLK
Contemporary Face - Black
F1846
DRI3030TEN-CONTF-MNK
Contemporary Face - Mink
TOOLS NEEDED
5/32” Allen Wrench
GENERAL INFORMATION
All of these parts may scratch and bend, great care should be used
in handling them.
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
Figure 2
Upper Air Deflector
Loosen Top Screws
(2 places)
Remove Side Screws
(2 places)
12
/06
/13
(3
)
