LT2-F Assembly Manual
SuperDroid Robots, Inc
Contact
224 Technology Park Lane
(919) 557-9162
Fuquay Varina, NC 27526
www.SuperDroidRobots.com
Revised: June 19, 2018
Page 21 of 25
When the tread is tensioned on each side, tighten the 4 screws that hold the tension block. (Here the
tread is removed in order to show a better picture. Your tread should be on and you can reach down
with a ¼” wrench to tighten the screws
.)
After each side of the tread is tensioned, you can then tighten the flipper arm motor chain. Slide the
motor in the slot until the chain is snug and then tighten down the M5 machine screws that hold the
motor into place.