SC826 JBOD Chassis Manual
3-2
3-3 Control Panel LEDs
There are four LEDs that provide status information about the system.
Power
The main power switch applies or removes primary power from the power supply
to the server but maintains standby power. To perform most maintenance tasks,
unplug the system to remove all power..
UID and IPMI
This button performs two functions. Press it briefly to toggle the UID alert light. To
reset IPMI to the factory default settings, press and hold for ten seconds.
3-2 Control Panel Buttons
The chassis includes two push-buttons that control the system.
Power
Indicates power is being supplied to the system power supply units. This LED is
illuminated when the system is operating normally.
NIC
Indicates network activity when flashing.
1
Summary of Contents for SC826 series
Page 30: ...2 20 SC826 JBOD Chassis Manual Notes ...
Page 46: ...SC826 JBOD Chassis Manual 4 12 Figure 4 9 Placing the System Fan in the Chassis 3 5 ...
Page 62: ...SC826 JBOD Chassis Manual A 2 Notes ...
Page 80: ...B 18 SC826 JBOD Chassis Manaual Notes ...