If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
1.
Remove the lid from the SuperPonic XL12 system and set it aside for now.
Notice the channels located on the rim of the reservoir (image a). These
channels will be for the placement of the Air Pump Tubing and Water
Pump power cord.
AIR PUMP AND AIR STONES
2.
Locate the four gray Air Stones included in the shipment (image b). Place
the Air Stones at the bottom of the SuperPonics reservoir.
Note: The Air
Stones have a male end that will fit in the black Air Pump tubing.
3.
Locate the black Air Pump tubing for the Air Stones connect the tubing to
the end of each airstone. Arrange the tubing into the channels located on
rim of the reservoir (image c).
4.
Locate the Air Pump included in your shipment (image d).
THIS PUMP SHOULD NEVER BE PLACED IN WATER
5.
Connect the open end of the Air Pump tubing to the metallic outputs
located on the Air Pump (image e).
SuperPonics XL12 System Assembly
Your plant roots need and love oxygen! It is extremely important
to the health of the plants that you keep your Air Pump and Air
Stones running at all times when the system is in use.
SUPER GROW TIP:
NOTE:
a
b
c
d
e
