If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787
1.
Locate and unpack the Custom Carbon Filters (image a).
2.
Remove the four wing nuts on the back side of the fan (image b), then
remove the fan grill from the fan.
3.
Locate the two large openings near the top of the back of the cabinet with the
four small surrounding holes (image C). With the help of a partner hold the
Carbon Filter and fan flush to the
INSIDE
back of the cabinet. Make sure to
place the four bolts through the four provided holes.
4.
Have a partner place the fan grill on the outside of the cabinet on the four
filter fan bolts. Place a washer on each bolt, then secure with wing nuts
(image d). Repeat steps 1-4 for the second Carbon Filter/Fan.
5.
Run the power cords for the Carbon Filter Fans through the nearest Elbow to
the back of the cabinet.
Installing your Custom Carbon Filters
NOTE:
THE CARBON FILTER POWER CORD REMAINS INSIDE THE
CABINET, NOT THROUGH THE FAN HOLE OPENING.
a
b
c
d
