Superchips Flashpaq Manual Download Page 16

SAFETY GUIDELINES

Throughout this User Manual you will see important messages regarding 

your safety or the protection of your vehicle. These messages are 

designated by the words WARNING, CAUTION, or NOTICE.

A WARNING indicates a hazardous situation which, if not avoided, will 

result in death or serious injury.

A CAUTION indicates a hazardous situation which, if not avoided, could 

result in minor or moderate injury.

NOTICE

A NOTICE indicates a condition that could cause damage to the product or 

your vehicle.

The Superchips Product you have purchased is a high-performance 

product. As such, it does present some risks of which you should be fully 

aware. Do not use this product until you have carefully read the following 

safety information and the Owner Agreement.

WARNING

CAUTION

Before using device, read and understand the user manual, including these additional 

safety instructions. Failure to do so could result in DEATH or SERIOUS INJURY.

Do not exceed legal speed limits on public roadways. Violating traffic laws is dangerous and

could result in injury or vehicle damage or both.

Use any enhanced speed capabilities of this product only in closed circuit, legally sanctioned

racing environments expressly for this purpose. Violating traffic laws is dangerous and could

result in injury or vehicle damage or both.

Do not operate the device while driving. Distracted driving could result in traffic accidents,

death or serious injury, and/or damage to your vehicle.

Always perform all adjustments or changes while stopped. Changing a setting while driving

can interfere with your attention to roadway conditions and could result in injury or vehicle

damage or both.

Do not stack products. “Stacking” performance-enhancing devices or other improper

installation can cause power train failure on the road. Other products may have features

incompatible with your Superchips device. Follow all installation and operating instructions.

Some modifications may affect other parts of your vehicle. For example, if you remove/

adjust the speed limiter in your vehicle, be sure your tires and other components are rated

for the increased speeds they will have to withstand.  Not doing so can lead to loss of

vehicle control. Modify the speed limiter only for use in closed circuit, legally sanctioned

racing environments, not for use on public roadways.

WARNING

SAFETY WARNING & CAUTION

Check out the performance chips and programmers we offer.

Summary of Contents for Flashpaq

















Reviews: