Full Cutoff LED Wall Pack
Important: Read all instructions prior to installation.
WPFC-R1 and
WPFCCT-R1 Series
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V1 04/27/2021
User Manual
5yr
Installation
CCT Adjustment
1. Remove screws and swing front housing down.
2. Drill holes in rear housing for mounting.
Note: For junction box wiring, remove rear pipe plug and for conduit mounting remove one of the side plugs.
3. Measure and create mounting holes on wall as needed.
4. Apply gasket and mount rear housing.
5. Select desired CCT using internal switch.
6.
With supply power off, connect wiring.
7. Resecure front housing to rear housing.
Junction Box Installation
Conduit Installation
On equipped models, selectable CCT
can be set using the internal switch.
Make certain supply power is switched
off when performing this procedure.
screws
1/8” Drill Bit
