+
-
+
-
+
-
+
-
+
-
+
-
Light Strip
(with stock female LC2 Connector)
Dimmer
Pigtail CPS Power Adapter Cable
+
-
+
-
+
-
Light Strip
(with stock female LC2 Connector)
Power Supply
+
-
+
-
+
-
+ -
+
-
+
-
+
-
+ -
Solderless Clamp On
Pigtail Adapter
Light Strip
Light Strip
Solderless Clamp On
Pigtail Adapter
Solderless Clamp On
Pigtail Adapter
Interconnect
8’
Power Wire (cut to size)
8’ Power Wire
(cut to size)
+
-
+
-
+
-
+
-
+
-
+
-
Bottom View of Cabinet
Cabinet Seams
Cabinet Lip
Flat Bottom of Cabinet
Light Strip
Light Strip
Interconnect
Note: This configuration is for over-the-stove microwave’s that have above cabinet storage with an existing outlet as a power source for the power
supply. Wiring may vary based on cabinet configuration and outlet availability.
General Diagram
DO NOT connect LED strip directly to 120V AC power. This kit requires a 12V DC Adapter (included power supply) to be powered.
DO NOT connect more than one 16.5’ section of light strips to the included power supply. Overloading the included power supply may cause
overheating, shorting, and possibly fire.
Be sure the power supply is not plugged into an outlet before connecting or disconnecting any of the kits components.
DO NOT expose the light strip to direct or indirect moisture.
Always observe proper polarity when connecting power and load.
Safety
866-590-3533
Note: If not using the Dimmer, see the
front of this sheet for additional options for
connecting to the power supply.
Female Terminal
Screw Adapter
(CPS-F2ST)
Flexible Light
Strip Interconnect
(NFLS10-2CSH)
LC2 Female Power
Connector Pigtail
(LC2F-PT)
CPS Adapter
Cable Clamp
(NFLS10-2CHCPS)
Solderless
Clamp-On Pigtail
Adapter
(NFLS10-2CPTH)
Pigtail CPS
Power Adapter
Cable
(CPS-PT)
LC2 Male Power
Connector Pigtail
(LC2M-PT)
+ -
+ -
+ -
+
-
OUTPUT
INPUT
+-
+-