4-Channel DMX512 Decoder
Important: Read all instructions prior to installation.
DMX3-4CH-4A
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V1 04/18/2022
User Manual
Operation
Button Function
Each decoder will occupy 4 address codes. The first character on the display will be A, H, or S to display the function setting.
The remaining three characters will be the DMX address (001–512) or the mode selection.
When in mode ‘A’, the decoder is being controlled by the DMX console. The digital display will show the first DMX address
with the next three consecutive numbers being the remaining channels the decoder will use. So if the display shows ‘A001’,
this means that the first channel is 001 and the other three channels are 002, 003, and 004 respectively. When connecting
to an additional decoder, the default value of the next decoder’s first channel would be 005 and the others three channels
of it would be 006, 007, and 008 in this example.
When in mode ‘H’, the decoder is using the built-in test mode programs. The remaining three character spots will display the
below codes to indicate which program is currently selected.
Display
Mode
Display
Mode
-00
Turn OFF output
-05
Static Purple
-01
Static Red
-06
Static Cyan
-02
Static Green
-07
Static White
-03
Static Blue
-08
Seven Color Jump (Speed Adjustable)
-04
Static Yellow
-09
Seven Color Fade (Speed Adjustable
When in mode “S”, press the SET button to enter the speed adjustment setting for H-08 and H-09, then press the +/- buttons
to adjust pattern speed.
SET button:
Mode selection switch. Hold for about 2 seconds to cycle to the next mode (A/H/S).
+
and
-
buttons:
These increase or decrease the DMX address value or select mode setting.
