Field-Selectable Wattage and CCT LED
Dusk-to-Dawn Area Light
User Manual
Important: Read all instructions prior to installation.
DDAL-SW3Bx
Parts Included
Specifications
Photocell Operation
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
- area light
- pole mount bracket
- access plate (for wall installation)
- hardware kit
DDAL-SW3B60
Model
DDAL-SW3Bx
Environmental Rating
IP65
Operating Temperature
-40°–113° F (-40°–45° C)
•
Product should be installed by a certified electrician in
accordance with applicable national, state, and local
building and electrical codes.
• To reduce the risk of electric shock, ensure that the main
power source and circuit breakers are switched off before
performing any installation or wiring procedures.
• Avoid looking directly into the lamp when illuminated.
• Ensure all mounts are securely attached and will support
the weight of the fixture. Failure to properly support
the fixture may result in damage or injury, for which the
manufacturer does not assume responsibility.
Safety and Notes
CCT and Wattage Selection
Included photocell sensor switches light on when ambient
light goes below 40 lx, and off when ambient light goes back
above 125 lx.
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
CCT and wattage are selected using the DIP
switch on the front of the light.
Rev Date: V1 11/01/2021
10#
.30in
7.62mm
2.65in
67.31mm
2.46in
62.43mm
2.17in
55.12mm
ON
Wattage Selection
Photocell
CCT Selection
100%
80%
OFF
ON
5000K
4000K
3000K
60%
1 2
4 5
ON
1 2
4 5
ON
1 2
4 5
ON
1 2
4 5
ON
1 2
4 5
ON
1 2
4 5
ON
1 2
4 5
ON
1 2
4 5
