SuperATV WS-P-RAN900-V Installation Instructions Download Page 2

Page: 2 / 4

IN-WS-P-RAN900-V

Bulb portion of Seal to always

face towards vehicle

Seal

"Seal Installation"

Seal along bottom from Clamp to Clamp

Seal along top

Seal between Clamps

Windshields contain shipping bolts that hold Captive

Nuts in place. Remove and discard shipping bolts.

Captive Nut

To ease installation, soak Seal in hot water before cutting or installing to increase flexibility.

Summary of Contents for WS-P-RAN900-V

Page 2: ...along bottom from Clamp to Clamp Seal along top Seal between Clamps Seal between Clamps Windshields contain shipping bolts that hold Captive Nuts in place Remove and discard shipping bolts Captive Nut 2x To ease installation soak Seal in hot water before cutting or installing to increase flexibility ...

Page 3: ...IN WS P RAN900 V 3 Acorn Nut 4x Shoulder Screw 4x Vent R Windshield Assemble Vents R L to Windshield with hardware shown Front passenger side ...

Page 4: ...unt Clamps Insert Clamps into slots in Windshield 1 Insert Mount Clamps into Windshield 2 Wrap around vehicle Roll Bar and secure 3 Ensure that Seal is in contact with vehicle Hood Windshield Vent R Thumb Screw 1x Front passenger side install Thumb Screw though each Vent and into factory installed Captive Nut ...