Superabrasive
Owner’s Manual Original Language – Lavina
®
V25-X
06/2018
9
5.3 FILTER CHANGE
IMPORTANT: All of the following steps must be
performed with the dust collector switched off and the
power cable disconnected from the power source. Before
performing any work or maintenance on the vacuum, be
sure to wear the proper protective equipment. This may
include clothing which covers any exposed skin,
protective eyewear, a respirator, and/or protective gloves
conforming to protection class FFP3.
To change the main filter first loosen the 4 latches
(pos.1,fig.5.3) and open the hinged motor head
(pos.2,fig.5.3). Be careful not to damage the power cable.
Lift the used filter and place it gently in a plastic bag. This
bag must be properly disposed of. Insert a new filter.
Close the motor head and resecure the four latches.
CAUTION: If you are removing the Main filter in order to
clean it: hitting the filter with force or use of compressed
air will destroy the filter. It can handle water, but high
pressure water cleaning will destroy it.
Figure 5.3