Superabrasive
Owner’s Manual Original Language – Lavina
®
V20-X
08/2018
12
The fuses of the motor are under the cover (Fig
6.1). To check if any are impaired (in case of a non
operational motor), unscrew the 4 screws and lift
the cover (Fig 6.1). They are located on the motor
base plate (Fig 6.2).
IMPORTANT: Ensure that the problem
causing the switch to turn off is fixed before
operating the vacuum again.
6.2 VACUUM MOTOR SERVICING
To reach the motors for servicing, the motor head cover should be dismounted.
To change any of the motors, first unscrew the 4 screws (Fig 6.3) and take out the motor base plate.
IMPORTANT: Together with the motor base plate remouve the power switches board. (Fig 6.4).
During the life of the vacuum motor, the carbon brushes inside the motor may be replaced once. These brushes are
considered to be a ‘wear part’ and their replacement is not covered under the vacuum warranty. For additional
information, please contact Superabrasive, or an authorized service facility.
Figure 6.1
Figure 6.2
Figure 6.3
Figure 6.4
