Superabrasive
User Manual
Original Language
Lavina® 25LEU
5/2019
9
3.2 TURNING THE MACHINE FROM WORKING TO TOOL MOUNTING POSITION
Put the handles of the carriage as shown on (Fig. 3.5).
Ensure that the
water tank is empty before flipping the machine. Push the handles and flip
in position shown on (Fig. 3.6).
If necessary, help by placing your foot on
the heel near the control box
.
3.3 LIFTING
Lifting the machine by crane is possible by using the handles of the carriage (see fig. 3.5 and fig. 3.6).Do not lift any other loads
on the machine. Always use hoisting equipment rated for 350 kg (772 lbs) or greater.
3.4 STORAGE
Always store the LAVINA® ELITE machine in a dry place.
Never transport the LAVINA® ELITE machine unprotected; it
may
be damaged if transported unprotected and exposed to rain
or
snow.
When the machine is in storage and the temperature may
fall
down to or below 32F (or 0
o
C). You should empty the water
from the system:
-
Pull out the hose of the tank (Fig.3.7)
-
With compressed air blow out the water from the
system in the two positions of the turn-cock.
4. OPERATION
4.1 PRELIMINARY CONTROLS
Inspect the working area as explained in the safety instructions. Fill in the water tank for wet use or connect the vacuum extractor
and ensure that the vacuum hose is clear and it will follow the machine easily.
Make sure that the electrical motor is connected with the power box and then you can connect the power cable with the electricity
and start the machine.
Figure 3.7
Figure 3.5
Figure 3.6
