Superabrasive LAVINA B21-E, User Manual

Page: 7 / 23

Superabrasive User Manual Original Language Lavina®B21-E 4/2016
7
Always wear safety gloves when changing the tools.
Always wear clothes suitable for the work environment.
OPERATOR
The Lavina®B21-E machine.
The operator must know the machine’s work environment.
Only one operator at a time can work with the machine.
The operator must be properly trained and well instructed
prior operating the machine.
The operator must understand all the instructions in this
manual.
The operator must understand and interpret all the drawings
and designs in manual.
The operator must know all sanitation and safety regulations
pertaining to the operation of the machine.
The operator must know what to do in case of emergency.
The operator must have an adequate technical knowledge and
preparation.
3. HANDLING AND TRANSPORTATION
ADJUSTING HANDLE
When adjusting the handle pull up the clip (Fig. 3.1) and pull out the pin (Fig. 3.2). Turn the handle to the desired position
and lock in the reverse order (Fig. 3.3). When locking the hole (Fig. 3.4) the handle is in down position close to the board
for compact size of the machine.
POWER CABLE MANAGEMENT
There is a possibility to run the power cable along the side of the machine
through a specially mounted support (Fig. 3.5). When not in use the
support is put on the left or right side of the machine.
STORAGE
Always store and transport the Lavina® machine in a dry place. Never transport the Lavina® machine unprotected; it may be
damaged if transported unprotected during rain or snow.
Figure 3.1 Figure 3.2
Figure 3.3 Figure 3.4
Figure 3.5