Superabrasive Lavina 25HV, Owner'S Manual

Page: 7 / 63

Superabrasive Owner’s Manual – Lavina25
®
ll/25
®
HV 06/2009
7
Lavina 25
®
HV
Working width
Tool holder diameter
Tool diameter
Tool holder rpm
Power
Weight
Grinding pressure
Additional weight
Application
Vacuum port
Water tank capacity
Water feed
Voltage/Hz
Amperage
Cable length
Machine LxWxH
Packing LxWxH 655mm 25”
3 x 165 mm
3 x 6.5”
3 x 225mm 3 x 9”
300-1440 rpm
5.5
kW 7.5 hp
166 kg 360 lbs
86kg 189 lbs
2x22 kg 48 lbs
Wet and dry
yes
16
l 4.2 gal
Peripheral
3x380-480 Volt
50-60 Hz
14 Amp
17.4
m 57.1 ft
1350x690x1100 mm 54”x27.6 x44
1160x730x1130 mm 45.7”x28.7”x44.5”
Environmental Conditions
The correct temperature range for operating the Lavina 25
®
ll/25
®
HV outdoors is between 41°F and 86°F
or 5°C and 30°C. Never use the Lavina 25
®
ll/25
®
HV during rain or snow when working outdoors. When
working indoors, always operate the machine in well ventilated areas
Vibrations
The vibrations of the machine are within the limits of directive 2003/10/EC (the seventeenth individual
Directive of Article 16(1) of Directive 89/391/EC) when the Lavina 25
®
ll/25
®
HV is operated with the
recommended tools and in normal conditions.
Sonorous Emissions
The sonorous emissions are, also within the limits of directive 2003/10/EC (the seventeenth individual
Directive of Article 16(1) of Directive 89/391/EC). However, as previously stated, the operator must wear
ear protectors.
Vacuum Connection
A connection for a vacuum dust extractor is located on the carriage. The Lavina 25
®
ll/25
®
HV does not
include a vacuum dust extractor. The customer must purchase the vacuum dust extractor separately. The
hose of the vacuum extractor must be Ø 50 mm and can be glided over the pipe.
The vacuum dust extractor must be adapted for floor grinders and have a minimum air displacement of
20m3/h with a negative vacuum of 21 kPa.
Electrical Connection
The tension and power (ampere) are displayed on the electrical control box to avoid any incorrect
connection. Refer to these before connecting the power. To avoid electrical shocks, make sure the
ground power supply is functioning properly.