SUPERSAW
TM
OPERATING STEPS
Loosen the screw nut
counterclockwise and
remove the side cover
Install the side cover and
tighten the screw gland nut
Adjust Chain Tension Twist
the Adjusting Screw Clockwise
to tighten tension. Make sure
the chain is not loose on the guide plate.
Align the hole, then install
the guide plate and chain
1
2
3
4
Insert the battery pack
5
1
2
3
4
5
Note regarding Step #3:
Tightening to an extreme level can cause contact between the side cover and chain.
This can lead to strain on the motor during operation causing reduced perfomance and or damage to the motor.
