Installation for IGP231/IGS54
Galaxy LED Pool & Spa Lamps
WARNING:
Some housings use a special
pilot screw. This screw mounts and electrically
grounds the housing securely to the mounting
rings and wet niche. Failure to use the screw
could create an electrical hazard which could
result in death or serious injury to pool and spa
users, installers or others due to electrical
shock.
(Fig. 5)
Controlling the IGP231/IGS54
Galaxy LED Pool & Spa Lamps
Use the pool or spa’s existing light switch to control the effects.
CHOOSING EFFECTS
Galaxy LED Lamps are pre-programmed with an assortment of lighting effects.
• When you turn the Galaxy LED Lamp off and then on again within three
seconds, it advances to the next effect.
• When you turn the Galaxy LED Lamp off and leave it off for more than five
seconds, it returns to the first mode “white”.
DESCRIPTION OF EFFECTS
1. White only
2. Color Change
-
Colors transition from color to color, cycling through the
color spectrum. Each color cycle take approximately 1 minute.
3. Yellow
4. Blue
5. Orange
6. Green
7. Hot Pink
8. Cyan
9. Blue/Green Mix
10. Party Mode™
- Multiple Colors transition quickly, cycling through the
color spectrum.
