Super Start SPSS2-CA Owner'S Manual Download Page 3

• 3 •

IMPORTANT SAFETY INSTRUCTIONS

WARNING – RISK OF EXPLOSIVE GASES

WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. 

BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL OPERATION. 

FOR THIS REASON, IT IS IMPORTANT THAT YOU FOLLOW THESE 

INSTRUCTIONS EACH TIME YOU USE THE CHARGER.

To reduce the risk of a battery explosion, follow these instructions and 

those published by the manufacturer of the battery and any equipment 

you intend to use in the vicinity of the battery. Review the cautionary 

markings on these products and on the engine.

WARNING: 

Pursuant to California Proposition 65, this product contains chemicals 

known to the State of California to cause cancer and birth defects or other 

reproductive harm. Wash hands after handling.

• 

Keep out of reach of children.

• 

Use the battery charger on 6 and 12V LEAD-ACID, GEL and AGM-type 

rechargeable batteries with recommended rated capacities of 12Ah (6V) and 

12-35Ah (12V), as used in automobiles, trucks, tractors, airplanes, vans, RVs, 

trolling motors, etc. This charger is not intended to supply power to low-voltage 

electrical systems, other than in a motor-starting application.

WARNING:

 Do not use battery charger with dry cell batteries that are 

commonly used with home appliances. These batteries may burst and cause 

injury or damage to property.

• 

Use only attachments recommended or sold by the battery charger’s 

manufacturer. Use of non-recommended attachments may result in a fire, 

electric shock, or injury.

• 

Locate the battery charger’s power cord so it cannot be stepped on, tripped 

over, or subjected to damage or stress.

• 

Do not operate the charger if it has received a sharp blow, been dropped, 

or otherwise damaged in any way. Take it to a qualified professional for 

inspection and repair.

• 

Do not disassemble the charger. Take it to a qualified professional when 

service or repair is required. 

• 

To reduce the risk of electric shock, unplug the charger from the outlet before 

attempting any maintenance or cleaning.

• 

Do not use an extension cord. 

• 

Always charge the battery in a well-ventilated area.

• 

Do not set the charger on flammable materials, such as carpeting, upholstery, 

paper, cardboard, etc. 

• 

Never smoke or allow sparks or flames in the vicinity of the battery or engine. 

Summary of Contents for SPSS2-CA












Reviews: