background image

EXTERNAL TAP IN/OUT:

There’s one more ¼” jack on the back that lets you slave 

your other Super Seekers(

as well as most other pedals with a 

¼” tap tempo in/out jack

) together, or use an external momen-

tary switch to tap in tempo remotely. When Super Seek-

ers are connected to each other’s tap in/out jack, tapping 

on any one of them will cause all of them to jump to that 

tapped tempo.

SAVING PRESETS:

If you come up with a favorite program and you want to be 

able to recall it later, there are 8 “slots” in which a com-

plete setup can be stored. To prepare for storage, push 

the “steps/preset” knob down and turn it to one of the 8 

slots (

one led in the first 8 steps will indicate which slot you’ve 

selected

).  Next, get your programming all done, adjusting 

your individual settings and fine-tuning the pedal until you’re 

happy. When you’re ready to save your settings, hold down 

the “steps/preset” knob and then push and hold down the 

“tap/hold” button until you see a couple of LEDs flicker next 

to that button. Your program is saved and will remain in 

memory even if the battery is removed from the pedal.  

What exactly gets saved? Glissando and groovy settings, last 

tempo settings, your last chosen mode (

HOLD, DELTA, TAP

), 

your chosen number of stages, tap/midi division, and DELTA 

setting. The DELTA toggle position and STP/SEQ/RND 

toggle position are also saved.  The expression toggle position 

and GROOVE/SEEK toggle position are not saved.

RECALLING PRESETS:

To access a saved preset, push down and turn the “steps/

preset” knob until you get to the slot you wish to recall. Re-

lease, and voila! You’ve recalled your preset. You might have 

to reset the expression toggle position and GROOVE/

SEEK toggle, those settings are not saved.

HOW TO SAVE A SETUP WHEN YOU’RE NOT IN THE SLOT 

WHERE YOU WANT TO SAVE IT:

That was a mouthful. When you’re fooling around with the 

Super Seek Trem and come up with a really cool setup that 

you want to save, you may suddenly realize that you aren’t 

parked in the slot where you want to save it. In fact, you 

may be parked in a slot that you really don’t want to write 

over. What to do? Very simple, really, but be careful. Pick a 

slot that you (probably) don’t care about, or may be empty. 

Push in the “steps/preset” knob and rotate it to the slot that 

you want to over write. DON’T RELEASE IT!  Now push 

down the “tap/hold” switch and wait until you see the happy 

blinky LEDs illuminate next to it. You’ve just saved your set-

tings in the selected slot.  

If you accidentally release the “steps/preset” knob before 

you push and hold the “tap/hold” switch, you’ll wind up 

loading whatever preset was chosen (if there was one 

stored there), and lose the settings you were trying to save.  

Also, if you chose a slot that you thought contained nothing 

important and it was actually a really wonderful setup that 

you never ever ever wanted to lose, you just lost it. DON’T 

DO THAT! There are 8 program slots for you to fill with your 

creative genius. We left ourselves a little extra room in the 

Super Seek Trem’s brain for code updates. Just in case we 

think of something really fun to add later. Although activat-

ing more features may eventually require pushing all buttons 

at once, while rubbing your nose on the back of the unit.

INTERNAL CONTROLS:

Inside the pedal you’ll find a trim pot for changing the overall 

volume level of the tremolo. The pot is set here at the shop 

for unity gain, because that’s how we like it.

POWERING YOUR PEDAL:

We highly recommend that you use a high-quality 9VDC 

power supply with your Super Seek Trem with at least 

100mA capability.  It should have a center-negative BOSS-

type barrel connector. The pedal can operate using a 9V 

battery but do not expect much battery life… this thing 

is a power hog because of all of the LEDs and the micro 

controller.

WARRANTY:

As with all Z.Vex Effects, we will be very happy to help you 

out and fix up any damaged or defective Z.Vex product. To 

extend your Vexter’s warranty from 1 year to 2, please fill 

out the enclosed warranty card and mail it to us, or contact 

[email protected] with the information. Feel free to contact 

us at [email protected] and/or [email protected] with any 

questions.

Enjoy!

WE’VE INCLUDED A PHOTO OF THE SUPER SEEK TREM

 

ON THE REVERSE OF THIS PAGE FOR YOUR CONVENIENCE!

Page 3 of 4

Reviews: