Connecting to the Telescoping Pole
1. Open the assembly lock on the telescoping pole, and push the chain saw head into the
opening on the end of the pole (Fig. 10).
2. When the lock tabs snap in, lock back the assembly
lock, the pole chain saw will be ready to use (Fig. 11).
3. To remove the chain saw head, release the On/Off
trigger switch and remove the battery. Unlock the
assembly lock. Push the lock tabs on both sides, and pull the chain saw head out (Fig. 11).
OPERATION
Starting and Stopping
1. Slide the battery into the battery compartment until it clicks to lock it into position (Fig. 12).
2. To turn the pole chain saw ON, push and hold the safety lock switch (located on the handle)
forward with your thumb and then squeeze the On/Off trigger switch with your fingers. Once
the tool is running, you can release the safety lock switch (Fig. 13).
3. To turn the tool OFF, release the On/Off trigger switch (Fig. 13).
12
Telescoping pole
Assembly lock
Fig. 10
Lock tab
Assembly lock
Fig. 11
Battery
Fig. 12
Safety lock
switch
On/Off trigger switch
Fig. 13
