Super Handy GUR019 Instruction Manual Download Page 3

TECHNICAL DETAILS

Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of 

hose in use. 

Read the following precautions and instructions before you begin assembly or using. Failure to 

comply with these instructions could result in personal injury or property damage. Keep these 

instructions in a convenient location for future reference. 

SAFETY PRECAUTIONS

1. Make sure incoming line pressure does not exceed rated operating pressure for your model 

hose reel.

2. Use proper eye protection when assembling and using the hose reel. 

3. Assemble the hose reel on a clean workbench. 

4. Use soap and water when checking for leaks. 

5. Keep children away from the work area. 

WARNING:

 

Exposure of skin directly to pressurized air, or fluid could result in severe 

bodily injury.

INSTALLATION of Reel

1) For overhead ceiling mounting: Install reels at most 10 feet/3m above the floor. 

2) If the reel you have purchased does not have hose included, you will need to purchase and 

attach. Refer to Specifications on box to determine appropriate hose size and length. 

3) You will need to purchase appropriate hardware for mounting your new reel. 

1. The reel base has four 1/2" (or 12.7mm) drilled holes for mounting on a suitable flat surface. 

Figure 2 is a template showing the correct location of the 4 mounting holes in the base.

2. The reel is supplied with a hose guide roller bracket. The bracket position may be 

changed depending on the reel mounting position. Figure 2 shows "Typical Mounting 

Positions". If bracket position needs to be changed, do the following:

(1) Pull out some hose and let reel latch. 

(2) Remove the bolts that attach the guide roller bracket to the support post. 

(3) Rotate guide roller bracket to correct position, replace bolts and tighten.

SKU#

GUR019

-20~60°C 

(-4~140°F)

Hybrid Polymer

3/8"/9.5mm

Hose Working 

Temperature 

Max Pressure

Hose Capacity

Material

I.D.

Length

50ft/15m

Inlet/Outlet

1/4”NPT

300Psi (20Bar)

E1

TECHNICAL

DETAILS

SAFETY

PRECAUTIONS

INSTALLATION

OPERATION

LIMITED

WARRANTY

EXPLODED AND

PARTS LIST

TROUBLE SHOOTING

421 [16.6"]

Ø421 [16.6"]

482 [19"]

149 [6"]

124 [5"]

Ø12.5 [0.5"]

101 [4"]

145 [5.7"]

194 [7.7"]

Summary of Contents for GUR019









Reviews: