background image

USE DIRECTION

1. The supply voltage should match the machine’s requirements.

2. Do not make the power wire knotted and pull off forced; Prevent breakage of wire core and 

circuit broken; Avoid the sharp objects to scratch the cable insulation layer and cause 

leakage.(AC)

3. Do not make the pipe folded and extruded, avoid the metal or other sharp objects puncture 

the pipe. 

4. Do not turn on and off power switch frequently, avoid damage the switch and motor. When 

there is abnormal sound or small during working, shut down immediately, cut off the power, 

and contact professional personnel to repair. If cannot resolve the problem locally, please 

contact our company directly (1-866-493-0524), non-professionals is strictly prohibited 

disassemble.

BATTERY USE AND CARE WARNINGS (DC)

1. Battery must be fully charged before first use.

2. Plug the charger into a 110-240 AC outlet, a red light should appear on the charger. Charge 

the battery until the light on the charger turns solid green.

3. Always charge the battery at room temperature. If the battery is used in a cold environment, 

allow it to warm up for at least an hour before charging. Cold batteries will not be charged 

completely and battery components may be damaged.

4. Only charge battery in well ventilated area away from flammable materials such as cloth or 

carpeting.

5. To disconnect charger, remove the plug from outlet, then disconnect the charger from the 

battery.

6. DO NOT leave the charger being connected to the battery for more than 24 hours.

7. The battery status indicator is mounted on the top of the battery to allow you to observe the 

level of the battery power while in use. To check the charge level, simply press the indicator 

button. The lights on the status indicator show the charge level of the battery.

8. If battery becomes warm or hot during charging procedure, disconnect it from charger. Allow 

battery to return to room temperature, and attempt to charge again. If this persists a second 

time, disconnect battery from charger and contact customer service.

9. Battery Maintenance Responsibility: Fully charge and discharge the battery at least once 

every 8 months to maintain battery’s health.

10. Store the battery on a full charge.

11. When battery pack is not in use, keep it away from other metal objects like paper clips, 

coins, keys, nails, screws, or other small metal objects that can make a connection from one 

terminal to another. Shorting the battery terminals together may cause burns or fire.

Summary of Contents for GUO081









Reviews: