background image

4

TROUBLESHOOTING

All new machinery is supplied with limited 12 months Warranty.

1. The manufacturer warrantees this electric power barrow against defects in material and craftsmanship, for a 

period of 12 months from date of original purchase;

2. Items considered as consumable parts are not normally covered by the warranty, including but not limited to: 

Batteries, Electric cables; Filters;

3. This warranty excludes parts that are worn or damaged due to normal wear, routine tune up or adjustment, 

abuse/misuse or neglect, overheating lack of maintenance, fittings/fasteners becoming loose/detached through 

lack of maintenance.

4. The warranty does not cover damage caused by accident, misuse or faulty installation, improper handling, 

routine maintenance items such as O-rings, seals, and lubricants, accessory parts.

5. The electric power barrow must be installed and maintained in compliance with the instructions.

Problem(s) 

The power barrow

does not run.

The power barrow

runs sluggishly

.

Possible Cause

Battery is not charged.

The wire is loose.

The controller is damaged.
Battery volume is low.

The battery is old and does not accept full 

charge.
The conditions are too stressful for your

power barrow.

Corrective Action

Charge the battery pack according to the

instructions included with you model.

Check all the connectors and to see if any partis 

loose or not.
Replace the damaged one with specific controller.
See the battery indicator to check the volume.

Charge the battery pack according to the

instructions included with you model.
Replace the battery with a new one.

The barrow is intended for residential use.

If slopes are too steep or the terrain too bumpy,

your barrow might experience a noticeable 

decrease in performance.

Summary of Contents for GUO057







Reviews: