13
ENGLISH
switch or plugging in power tools that have
the switch on invites accidentes.
− Remove any adjusting key or wrench before
switching the power tool on.
− A wrench or a key left attached to a rotating
part of the power tool may result in personal
injury.
− Do not overreach. Keep proper footing and
balance at all times.
− This enables better control of the power tool
in unexpected situations.
− Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
− Loose clothes, jewellery or long hair can be
caught in moving parts.
4. POWER TOOL USE AND CARE
− Do not force the power tool. Use the correct
power tool for your application.
− The correct power tool will do the job
better and safer at the rate for which it was
designed.
− Do not use the power tool if the switch does
not turn it on and off.
− Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
− If the replacement of the supply cord
is necessary, this has to be done by the
manufacturer or his agent in order to avoid
a safety hazard.
− Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
− Such preventive safety measures reduce the
risk of starting the power tool accidentally.
− Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
− Power tools are dangerous in the hands of
untrained users.
− Maintain
power
tools.
Check
for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use.
− Many accidents are caused by poorly
maintained power tools.
− Keep cutting tools sharp and clean.
− Properly maintained cutting tools with sharp
cutting edges are less likely to bind and
easier to control.
− Use the power tool, accessories and tool bits
etc., in accordance with these instructions
and in the manner intended for the
particular type of power tool, taking into
account the working conditions and the
work to be performed.
− Use of the power tool for operations
different from intended could result in a
hazardous situation
5. SERVICE
− Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
− This will ensure that the safety of the power
tool is maintained.
Additional safety instructions for your impact drill
− Do not use the electric power tool with a
damaged cable. Do not move the damaged
cable, and pull out the power plug if the
cable becomes damaged during operation.
Damaged cables increase the risk of electric
shock.
− Connect the electric power tool to electricity
through a 16/25A maximum secured contact
protected outlet (230/120V~, 50/60Hz).
Consult your electrician.
− If the replacement of the supply cord
is necessary, this has to be done by the
manufacturer or his agent in order to avoid
a safety hazard.
− Materials containing asbestos may not be
worked on.
− Fine dust particles can remain in the air,
despite the installation of a dust vacuum,
and can greatly endanger your health.
− Use the included auxiliary handle with this
machine.
− Losing control of the machine can lead to
injuries.
If you use this impact drill the first time, remove the
packaging and make sure tha all parts are there (see
Service elements and accessories)
DANGER OF INJURY!
Before all adjustments and settings:
- Turn the machine off.
- Wail until the machine has come to a
complete standstill
- Pull out the power plug
1. AUxILIARY HANDLE
Never use the impact drill without the attachable
handle (3). The attachable handle provides additional
support and allows you to work exhaustion-free. It is
intended for both-right-and left-handed people.
Before operation