8
www.supercircuits.com
SECTION 4: CLEANING
SECTION 4
Cleaning
Clean the camera lens and IR lamp shield with an approved glass
cleaning solution and a lint free cloth.
•
Remove all foreign particles, such as plastic or rubber materials,
attached to the camera housing. These may cause damage to the
surface over time.
•
Dust can be removed from the unit by wiping it with a soft damp
cloth. To remove stains, gently rub the surface with a soft cloth
moistened with a mild detergent solution, then rinse and dry it with
a soft cloth.
CAUTION
Do not use benzene, thinner or other chemical products
on the camera assembly; these may dissolve the paint
and promote damage of the surfaces. Before using any
chemical product, read the accompanying instructions
carefully.
PC177IR_CM.indd 8
2/25/2010 10:32:13 AM
