Rear Wall Mount Installation
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
LED Exit Sign
Important: Read all instructions prior to installation.
XS2 Series
User Manual
¹
¹Limited 2-year warranty on battery.
Rev Date: V1 05/07/2021
1.
Turn off supply power.
2.
Carefully remove “exit” panel using a flat-
head screwdriver to release tabs.
3. Create holes in the blank panel for wiring
and mounting in blank panel.
4. Connect wiring to junction box,
corresponding to voltage. Cap unused wire.
Note: Red and black wires should never be
connected at the same time.
5. Mount to junction box/surface.
6. Reinstall “exit” panel, and install directional
arrow covers as needed.
7. Turn on AC supply and allow battery pack to
charge for at least 24 hours before initial use.
8. After 24-hour period, press test button to
make certain light is functioning as intended.
Fixture Housing
Mounting Bracket
Crossbar Bracket
Junction Box
Fixture Housing
Mounting Bracket
Crossbar Bracket
Junction Box
Fixture Housing
Crossbar Bracket
Junction Box
