manualshive.com logo in svg

Super B BIB, Manual

Share
Download
Super B BIB Manual Download Page 2

2

  User Manual Battery Interface Box (BIB)

Dear customer,

This manual contains all the necessary information to install, use and maintain the Battery 
Interface Box. We kindly ask you to read this manual carefully before using the product. In 
this manual the Battery Interface Box will be referred to as the BIB. This manual is meant 
for the installer and the user of the BIB. Only qualified personnel may install and perform 
maintenance on the BIB. Please consult the index at the start of this manual to locate 
information relevant to you. 

During the use of the product, user safety should always be ensured, so installers, users, 
service personnel and third parties can safely use the BIB. 

Copyright© Super B All rights reserved. Licensed software products are owned by Super B 
or its subsidiaries or suppliers, and are protected by national copyright laws and international 
treaty provisions. Super B products are covered by Dutch and foreign patents, issued and 
pending. Information in this publication supersedes that in all previously published material. 
Specifications and price change privileges reserved. Super B is a registered trademark of 
Super B. 

For more information please contact: 

Super B Lithium Power B.V.
Demmersweg 3 
7556 BN Hengelo (Ov) The Netherlands 
Tel: +31(0)88 00 76 000
E-mail: [email protected] 
www: www.super-b.com

Summary of Contents for BIB

































Reviews:

No comments

Brands by name

Popular brands

Load more brands