16
4. PEDAL ASSIST
• To view your pedal assist mode, follow these steps once the display
has been turned on and you are seated on the Super73:
• Press on the menu “O” button briefly to switch between display
views until “Assist” appears on the screen.
• Press the up “
^
” button to increase the pedal-assist level. To
decrease the assist level, press the down “v” button. Pedal assist
ranges from 1-4, with 0 meaning pedal assist is turned off. The
higher the level, the more electric assistance you’ll get, and the
less you’ll have to pedal.
• Level 1 (ECO) - 25% Speed Power
• Level 2 (TOUR) - 50% Speed Power
• Level 3 (SPORT )- 75% Speed Power
• Level 4 (SUPER) - 100% Speed Power
• Once you begin pedaling, the pedal assist sensor will activate the
motor and you will begin to accelerate to the selected assist level.
• The display will revert to previos veiwing mode after desired assit
level is chosen.
5. BRAKING
• The brake levers are equipped with brake sensors that cut power
to the motor when either of the levers are compressed. The RX
employs the Tektro Dorado hydraulic brake systems. The right
lever will activate the rear brakes when compressed and the left
lever will activate the front brakes when compressed.
• The Super73 brake orientation is as follows:
Rear brake = right lever
Front brake = left lever
6. SETTINGS MENU
• Hold down the “O” button on display to activate the settings menu.
• Settings parameters:
• Contrast (display window contrast 0-100)
• Units (standard is set to mi/F)
• Position (changes the orientation of display if it is on the left or
right side of the bike)
• Backlight (display backlight power 0-100)
• Version is the software version of the system.
• Coin is the battery level inside desiplay.
