33
32
Measurement procedures
There are two distinct measurement procedures .
The both procedures are very similar and differ
only in the first steps . Each measurement proce-
dure is test-specific . The procedure is transferred
to the instrument via the barcode strip . All steps
involved to obtain the result are displayed on
the screen . Please also refer to the respective
Reflectoquant
®
package insert!
3 .2 .1 Measurement procedure A
This procedure has only one reaction time .
For choosing the right method compare the
first three digits of the batch number of the
Reflectoquant
®
pack . This reference number
must be the same as the one displayed .
If not, perform a method calibration (see section
3 .2, "Add a new method" .
Confirm your selection by pressing [START
measurement] .
The display shows for example:
Select the desired method using the [Up] and
[Down] buttons .
Confirm by pressing the [START measurement]
button
and follow the instruction in the package insert
of the corresponding Reflectoquant
®
test, e . g .
"Preparation", "Procedure" .
Shortcut
A method can be started directly at any menu
item by inserting the barcode strip of the
Reflectoquant
®
test .
Follow the instruction in the package insert of
the corresponding Reflectoquant
®
test, e . g .
"Preparation", "Procedure" .
