Page 7
Install Your Unit
Center the air conditioner in window. Check
that lower rail of air conditioner is behind
and against back side of window sill.
Maintain a firm hold on the air conditioner
cabinet. Lower window sash to hold cabinet
in place.
Measure the distance between the right-
hand side of the cabinet and the inside of
the window channel.
Repeat for the left side. Adjust the cabinet
until the distance on each side is the same.
Extend the left and right accordion panels to
the vertical window sashes and use the
screws to attach.
Install the frame locking brackets between
the bottom of the accordion panel and the
window sill. Attach with 2 screws.
To prevent the window sill from splitting,
drive the pilot holes before driving screws.
Check that air conditioner cabinet is tilted to
the outside so that water will run to the
outside.
Install the Support Bracket and
Seal the
Window
CAUTION:
To prevent broken glass or damage to windows,
on vinyl or other similarly constructed windows,
attach the window locking bracket to the window
side jamb with one screw.
Attach the right angel sash lock with screw
as shown below.
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
If the gasket supplied does not fit the window,
obtain appropriate material locally to provide a
proper installation seal.