DRIVE WHEEL RELEASE MECHANISM
●
This scooter is equipped with drive wheel release
mechanism. Your SupaScoota can be moved
manually after the drive wheels are released.
Do not operate this device on slope.
To disengage the drive wheels
Pull the drive collar (part “A”) out and
turn it left or right, then release it.
To reconnect the drive wheels
Turn the drive collar (part “A”) until it reconnects with the wheel and
then move the scooter until the collar connects with the drive. (a
loud click)
- 19 -
CRUISE CONTROL, LIGHTS AND SWITCHES
LH throttle is available at optional
To lock the speed lever for transportation:
CAUTION ! : ONLY BE USED WHEN POWER is OFF.
Pull the lever as arrow direction “R” and
use the other hand to turn the
locker as arrow direction “Q”
●
F : Forward and Reverse switch.
●
S : Speed lever.
●
K : Battery level indicator. (for lead-acid battery)
●
H : Key switch
●
J : Speed selection: F / full speed, S / reduced speed
●
I : Disable button for ESC
●
X: Disable ESC indicator
●
W: Cruise activate & deactivate button
●
Y: Cruise control indicator
●
E : Clamp for height adjustment
●
G: Handle bar angle adjustment
●
Z : Battery green level gauge
Please note the display of the three green levels (Z) varies
from different scooter models, battery sizes as well as the
terrains conditions.
Do not place your fingers on the speed lever before you turn the key
switch “On”.
Do not operate speed selection switch “J” when scooter is moving.
Pull the speed lever “S” and accelerate slowly. Do not pull speed
lever “S” in rapid operation.
- 20 -
