●
Use one hand to hold the handle, and use other hand to pull the lock
pin knob (C) and turn it anticlockwise. Then fold the handle down
until you hear the “click” of the locking pin fitting into position on the
main frame.
- 31 -
BATTERY AND CHARGING
●
When you get your new battery put it on charge for at least 24 hours.
●
When recharging your battery, always charge for at least 12 hours or
until the light on the charger turns green. It is best to charge for at
least another hour after the light turns green.
●
Never use the battery for any purpose other than to power your
scooter.
●
The battery charger can become hot during charging so your charger
should be placed in a suitable place with good air flow and away
from children.
To recharge the batteries, follow
the steps below:
●
Place your Scooter close to a
standard electrical wall outlet.
●
Turn the scooter key switch to
the “Off” position.
●
Plug the charger power cord
(Round plug) into the socket
indicated on scooter. (N)
●
Plug the charger power plug into a
standard wall outlet.
●
When charging is completed, the
yellow LED will turn to green.
●
Disconnect the charger power cord from the wall outlet and the plug
from the scooter when the batteries are fully charged.
●
NOTE:
The battery connector L1 must be connected to L2 for
charging.
- 32 -
