Assemble the battery tray as illustrated. Insert the screws and
tighten the nuts. When using a lithium battery it is recommended
that you place your lithium battery on rear tray of the scooter and
your SLA battery on the front tray.
It is also recommended that you use the lithium battery and keep
the SLA battery in reserve.
SPARE LITHIUM BATTERY
Optional
Assemble the locker “E” to the
position “D” as illustrated.
●
To have spare battery seated onto
spare tray, have 2 block (F) Insert
into slots (G) as illustrated direction
then push battery module downward.
●
You must check that the battery module has locked into
position.
●
To move the battery
just pull up and move away.
- 25 –
SWITCH THE BATTERY TYPE
This scooter can be used either SLA or lithium battery. To meet the
right voltage to the battery gauge, it is allowed to set by following
step to select the different types of battery for going to use.
●
Have the key switch at OFF position, keep pressing the ESC
button “I” and turning the key switch on, then releasing ESC
button.
●
Turn the FWD / REV switch “F” to select the battery type you are
going to use. (The led light of “K” must be at off position)
●
Li = lithium battery, SA = lead-acid battery
IMPORTANT NOTE:
The stored program only meets the specification of manufacturer’s
battery.
Do not use any battery (include lithium) & Charger which are
NOT specified by manufacturer.
FRONT WHEEL REMOVAL
To reduce weight when lifting the scooter
The front wheels of the scooter can be quickly removed when it is
in the folded position by pushing the release pin “J” and pull front
wheels out as per the illustration. This will reduce the weight by
approximately 2 kg
Reassemble in the reverse order.
- 26 –
