Suparule Systems Ltd
Page 4 of 24
CFZ DCF2038 v1.09
Sensorform EFI
Safety Notice
Review the following safety precautions to avoid injury and prevent damage to this
product or any products connected to it.
To avoid potential hazard, use this product only as specified.
Electrical shock can cause
serious or fatal injury.
This unit may also be connected to other equipment that may have high voltages.
Improper use can cause serious or fatal injury.
PRECAUTIONS
Equipment is protected throughout by the use of double/reinforced
insulation as per IEC 60417-5172.
WARNING:
Under certain fault conditions, high voltages can be brought
into the earth fault indicator enclosure. All parts within the enclosure
should be handled as if carrying dangerous voltages.
WARNING:
Use extreme caution during the installation and use of the
Sensorform EFI product as high voltages and currents may be present in
the circuit.
WARNING: Observe precautions for handling Electrostatic Sensitive
Devices
•
Ensure that the CT sensor is installed on the screened part of the HV cable
system and is at earth potential.
•
This product must be installed and used only by qualified personnel that are
familiar with practicing applicable safety precautions.
•
The Sensorform EFI product should not be installed on live conductors.
•
Wear necessary protective clothing and gloves as required.
•
Always inspect the EFI, CT sensor, and all leads for damage before using the
product. Do not use the product if damaged.
•
If the Sensorform EFI is not used in a manner specified, the protection
afforded by the equipment may be impaired.
